Toxic Mold Inspection and Black Mold Investigation InformationHow to Do Your Own Toxic Mold Inspection & Black Mold Investigation

How To Locate & Test Visible & Hidden Black Toxic Mold Spores
&  Mold Growth Infestations Thoroughly and Accurately!

 

Canada-USA Mold Training & Certification Seminar
June 16-17, 2007
Windsor, Ontario (across Detroit River from Detroit, Michigan). Taught in person by mold expert Phillip Fry. US$499 tuition per training designation (e.g., Certified Mold Inspector, Certified Mold Remediator, Certified Environmental Hygienist), plus $49 first year certification dues per designation. For details, email Phillip Fry.

 NOW AVAILABLE ($10.00 each by email attachment):
Landlord's Mold Disclosure to Tenant (easy-to-use legal form)
Seller, Seller's Agent, and Buyer's Agent Mold Disclosure To Real Estate Buyer
(easy-to-use legal form)

Do you have a question about toxic black mold, household mold, do-it-yourself mold inspection and remediation,
mold prevention, mold health, mold training, or any other mold problem anywhere in the world? Please email your
specific mold question, to international mold expert Phillip Fry moldconsultant@yahoo.com.You can also email
close-up, well-lighted photo's of your home or building mold problems.
 

STUDY MOLD AT HOME
Now globally available! Become an expert in mold inspection, testing, and remediation, and
prevention techniques by studying mold science in the convenience of your home at your most convenient time!
You can be trained and certified online as a Certified Mold Inspector, Certified Mold Remediator,
Certified Environmental Hygienisthttp://www.ecology-college.com, Certified Waterproofing Pro, and or Certified Leak Locator.

 New Mold Expert Designations Available March 1, 2007
 Certified HVAC Mold Expert
Certified Safe New Home Mold Expert
Certified Home Remodeling Mold Expert
Certified Car, Truck, & RV Mold Expert
For more info and details, email Phillip Fry.
 
California Mold Inspection     Nevada Mold Inspection
Arizona Mold Inspection     Utah Mold Inspection
Canada Mold Inspection
10 Steps for Preventing or Repairing Mold Damage from a Hurricane, Typhoon,
Tornado, Flood, Windstorm, Fire, Earthquake, or other natural disaster.
NOTICE: The information provided on this website was obtained from sources believed to be accurate. The information
is provided free as a public service with the specific understanding and agreement by the website visitor that the website publisher is not engaged in rendering medical or legal services. If medical or legal advice or assistance is required, the services of a competent, licensed medical doctor or attorney should be sought.

Read all 5 mold advice ebooks in the Mold Library to find & fix your home or workplace mold infestations, and to deal with the medical and legal consequences of mold for only $49.00!

Do-it-best-yourself Mold Prevention, Inspection,
Testing & Remediation
by Phillip Fry. $15.00


 

Mold Health Guide
by Phillip Fry. $15.00


 

Mold Legal Guide
by Phillip Fry and
Edward Dy [law school graduate]. $15.00


 

Mold Home Remedy Recipes & Instructions
by Phillip Fry. $15.00


 

Mold Monsters
by Phillip Fry and
Maria Adee Light Hilado
[B.S. Microbiology]. $15.00
Dry Rot Sensor Instructions: How To Do Dry Rot Inspection

There are 5 stages in the procedure as described.

Dry rot sensors are installed in small, pre-drilled holes within the building areas identified as at risk, and the dry rot sensors are then monitored usually for about two weeks during which time they reach equilibrium with the building substrates, and react to the presence of the dry rot fungus. Sensors installed beyond the "at risk" areas will confirm that there is no dry rot activity.

There is no need to uplift floors or to remove plasterwork. The extent of spread of dry rot can be determined from examination of the sensors.

1. Fit sensors
2. Allow to equilibrate
3. Examine sensors
4. Record affected areas and "at risk" areas
5. Monitor "at risk" areas for a further period

Dry rot sensors may be installed where there is a risk of dry rot presence or dry rot development.

They may be installed in plaster, in wood, or in brick or masonry walls.

The sensor is installed by placing it in a pre - drilled 7mm hole in the beam or wall. The hole should be deep enough

to fit the sensor fully into the hole (100mm deep).

After 14 days remove the sensor for examination.

If the color has changed from blue to yellow - at any point on the sensor - there is dry rot present. You should get help.

If there is no change in color or you are not sure place the sensor back in the hole and re-inspect after a further 14 days. Continue this process until the end of the test period, or until you are satisfied the beam or wall is fully dry.

[Home] [Up] [Dry-Rot-Sensors-Testimonials] [Dry-Rot-Sensor-Effectiveness-Testing] [Dry-Rot-Examples] [Dry-Rot-instructions] [Dry-Rot-Questions] [Dry-Rot-Sensor-Technical-Information] [Dry-Rot-Sensor-Safety] [Dry-Rot-Sensors-Case-Studies]
 

 

                                                 Last update: Feb. 3, 2007


Home | Environmental Yellow Pages |  Environmental
 Search Engine  |  Post Free Classified Ads |  Link Partners
=====
Do you have a question about toxic black mold, household mold,
do-it-yourself mold inspection and remediation, mold prevention, mold health, mold training, or any other mold problem?
 Please email international mold expert Phillip Fry moldconsultant@yahoo.com

Read the 25 steps recommended by Mr. Fry for safe and effective
mold remediation and mold removal.

 Bleach Mold Myth: "While bleach is often recommended for remediation of surface mold on wood, our [university research study] results illustrate that the treatment does not eliminate the surface microflora," is the conclusion of the Oregon State University study of the effects of chlorine bleach on mold growth on Douglas fir wood [an important timber crop in the state of Oregon]. The research study was conducted by Professor Jeffrey Morrell, Dept. of Wood Science, Oregon State University, as assisted by Adam Taylor [graduate research assistant] and Camille Freitag [Senior Research Associate], as published in Forest Products Journal, 54:4, 2004.   Mold Terms and Mold Terminology
 

Copyright © 199-2006. iPay, Ltd. All rights are reserved.